Thread: split tube axle

Tweet

Originally Posted by Matt167

The aftermarket did indeed try it, but inevitably it failed.

here is an idea you may be able to use http://www.hotrodders.com/forum/jour...ge=5&reverse=1

Just because he built it doesn't make it a good idea, we've all seen examples of bad engineering.

Mike

Originally Posted by Mike52

Just because he built it doesn't make it a good idea, we've all seen examples of bad engineering.

Mike

nothing wrong with that setup. just modified 1981 F-150 to fit the frame. the pivot points were measured out and are the same as what was originally on the F-150. if you look at all his work, you'll note that he doesn't produce shoddy work