While waiting for my engine to be rebuilt I decided to inspect and rebuilt my Fat Man front end. Previously emailed them to source parts and they said any parts for the 74 thru 78 MII will work for ball joints, breaks, Bushings, and Power rack. They were right except for the rack. The last guy may have had the same problem for there is bent plumbing and various washers used in the mounting. I want to do it right and tried looking at Jegs, Summitt, FR, and Speedway to find a R&P. I am "Dumb" on this issue. Can someone tell me the critical issues to be considered and their options. The current unit has two bolts thru the crossmember(on 15 and 7/8 centers) no separate bushings. I did see various mounting arrangements available. Are these an option.
This is a 46 chevy short bed with a 454 chevy/ turbo 400/ chevy power steering pump.