I have a 49 International KB2 pickup. Several years ago I put in a junkyard Mustang II front suspension with the aid of a Fatman Fab crossmember kit. When installed the coil springs were cut. The truck rode low and hard. I figured the truck weight was too much (1960 lb front). After a while it started to pull some to the right. I saved up and just installed a QA1 coilover conversion kit. It adjusted the ride to a better height and is closer to level. The heaver springs should help also. The problem is it still pulls right a lot. I had it aligned and the tech says the specs are right on. He thought maybe the rack was bad. It has the junkyard MII manual rack. It steers OK just wants to turn right. He didn't charge me because he couldn't make it right. Any ideas on how make it go straight down the road?