Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: front end lift-ers ?? anybody used them?
          
   
   

Reply To Thread
Results 1 to 12 of 12

Hybrid View

  1. #1
    halftanked is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Liberty
    Car Year, Make, Model: 1929 ford
    Posts
    504

    Scooter,I'd say go ahead and try them,they are far better than those twist in ones. You'd be a lot better off having the engine torque/ traction raise the front for you. Have you done anything with the rear suspension?

  2. #2
    R Pope is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2005
    Location
    Eston
    Posts
    2,270

    The ones you have are better than those twist-in ones. They tend to break springs due to putting a lot of pressure on one point, where the bigger ones shim the whole spring end. That said, you're probably better off going to a spring shop and getting a set custom wound with the characteristics you want. Coil springs don't last forever!

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink