Hi

I am a new ”member” with an urgent question.
I am building a 29 highboy roadster on 32 frame rails.
I am using an original model A rear spring on a Winters quick change rear axle.
Before I weld the spring hangers to the rear axle I need to know the distance between the spring perches on the (original) model A rear.
I was informed that the distance is 49 inches but I need to know if that is correct.
I think that 49” is to far apart to make the stock spring function properly.
Need your help as soon as possible, need to get this chassis rolling soon.

Vegard