has anyone ever put a book together on hotrod brackets & patterns I want to build my own batwings & other things like that are there any links I can go on to find things like this
Printable View
has anyone ever put a book together on hotrod brackets & patterns I want to build my own batwings & other things like that are there any links I can go on to find things like this
Nutter, check out Itoldyouso's post from the beginning.
http://www.clubhotrod.com/forums/showthread.php?t=23618
In there he did his. Also, J. Robinson has:
http://www.clubhotrod.com/forums/showthread.php?t=30400
Also, Last-Call's post:
http://www.clubhotrod.com/forums/showthread.php?t=29812
Also BrianRupnow has Built a frame from the ground up in one of his post and also computer designed a hot rod frame in another. These posts should give you plently of ideas.
Here's Brian's computer design frame project:
http://www.clubhotrod.com/forums/showthread.php?t=28617
He has so many on the yellow roadster pickup, I couldn't pick out the specific one to answer your question.
Jeez---Now I know how Elvis musta felt!!! Just got back from a 2 week driving holiday down to the Gaspe' in Quebec, and here are people talking about my infamous "How to build a frame" thread. If I can be of any help. email me, better yet, post any specific questions on this thread and I will answer for all to see.---Brian
Brian, only because you do such a great job of explaining it. Your work is top notch in my book.:) :) :)Quote:
Originally Posted by brianrupnow
Duane--Thanks for the kind words. When I first got into rod building, I just about went stone crazy trying to get information on things like brackets for batwings, etcetera. I had damn little money to buy aftermarket bracketry, in fact, when I got into the hobby there was a pretty limited supply of aftermarket stuff available---not like it is now. The other issue, (and its a big one), was having a full understanding of exactly how the bracket worked, in terms of active and reactive forces applied to it by the working of the cars suspension, acceleration, etcetera. What material to use, how thick should the material be, what kind of welding to use. Nutter has it right---that info is very difficult to find, and there is a lot of bad and downright unsafe information floating around on the internet. Thats why I did the "how To" thread on frame building, and why I still try to help anyone who asks for it. Itoldyouso's thread is also a perfect example of the right way to build a hotrod---Don shows excellent craftmanship, and very innovative design ideas.---Brian
Ok Ill explain what Im doing Im building a 1915 T C Cab delivery based on Andy brizo's one, Im using all original steel placing it on a jap pick up chassis (mitsubishi) this gives me the low stance for the body because of the kickups at the front & rear (chassis was free) I have removed the front suspension so I can use the super bell tube axle & im using 12 bolt (also free) rear on the chassis original springs, the problem I have is I cant afford the prices of parts over here so I wanted to build some the brackets. to hold the four bars to the chassis is no problem there will be a tube running through the top off the chassis & one off two brackets under the chassis the problem I have is what size steel do I need what angles are they on how far back can I go (mounting of bars) & I also want to run coil overs on the front weather in front or behind the axle. any drawings would be of great help. I will tyr & post some photos so far thanks
http://www.4wheeloffroad.com/techart...ension_part_1/
http://www.akfabshop.com/alaskaoffroad/suspension.htm
http://www.industrialoffroad.com/gee...php?page=4link
http://www.asianautopartsofaz.com/co...suspension.htm
http://www.broncoholics.com/support/...?TOPIC_ID=1096
http://www.muddtanks.com/4LinkSuspArticle.htm
just trying to post a photo this is my project photo taken out o NZ Rodder magazine