Thread: Pinion angle on IRS?
Hybrid View
-
11-17-2006 08:47 AM #1
You want the center line of the engine, transmission to be parallel to the center line of the pinion or main shaft if it is a quick change. If you are building your chassis on a frame jig and the frame is level just figure the amount of rake you will have in the car at ride height and how much angle you want in the engine, then set the rear end mounts accordingly and weld it in. Sounds simple, be careful.
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy