Thread: 36 chevy master sedan
-
09-27-2006 09:29 PM #1
36 chevy master sedan
I got a 36 chebbie master sedan, and want to keep the straight front axle. The style I want to go with is, I believe, referred to a bat wings and radius rods. I know there are kits available, but does anyone offer a full-scale template / plans / parts list for us poor folk?.
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-09-2006 05:45 PM #2
are you looking for parts locator book. I.e. for what car that will interchange with the 36 Chevy. this is what I can tell you that 35 Chevy sdn have interchangeable parts I.e. fender the same with a 36 standard sdn just the front hole will be bigger from the suspension difference. personally I would go with a ifs. that's what I did with mine
here is the link for the site where I have some photos
http://www.clubhotrod.com/forums/sho...ighlight=chevy
here is a link of bobs 36 Chevy he has great photos
http://www.36bo-ty.com/images/36boty/index.htm
-
11-09-2006 08:12 PM #3
I don't know of anyone who sells the plans. You could just get take some pics of a car with a set similar to what you want to fabricate.... Just stand a tape measure beside them to use as reference when you are building them. I've built my own a time or two, so labor intensive to build, found it cheaper to buy them and use the fab time making money on something else...Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance