-
07-19-2006 09:30 PM #1
Anybody ever seen/used this front suspension?
http://www.mustangmods.com/ims/u/936/4586/78810.jpg
Never saw anything like this, I just wonder how the spring is fastened to the axle? Wouldn't there be a lot of torque on the radius rod batwings if the spring was shackled to the axle?
CHAZ
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-20-2006 02:16 PM #2
Can't tell how the spring is attached to the axle. However, if it's connected correctly, it would work fine without binding. Connect the spring to a short shackle, then connect the other end of the shackle to the axle. That gives enough degrees of freedom to eliminate bind.Jack
Gone to Texas
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
I've had a lot of BIG things happening to me lately but now I'm back to working on the car some, it feels good! The tranny mount was bad and that helped put everything back where it should be....
SB distributor won't fit