Yes I would appreciate your help in getting the measurement.
My front end is IFS only its a dodge, but so similar to Fords
I have come to far to give up by discouragement. I have looked at many Mustang IFS kits.
I have finished the body drop, which was simple. The rear suspension I am doing the 4 link with watts linkage no comparison to a pan hard which pitches the rig to one side.
This is not mine. I am just showing you what it is.



I had a link that showing it working but I can’t find it. This will travel up and down like 12” with no swaying what so ever. There are to ways you can go, this one shows the linkage tied to the differential. The other is tied to the frame. The (KIT) cost is way out of town, but if you have got what it takes to build it, very cheap.