Thread: 1939 dodge brakes
-
11-27-2005 08:51 AM #1
1939 dodge brakes
I have a 1939 Dodge D11 with power disc brakes. There is a kit you can buy to convert to disc brakes. I will have to look through some magazines to locate the vendor. I found this out after fabricating a replcement backing plate to house 81 camaro calipers. I bought weld on brackets for rear axle. The rotors consist of a hat and rotor to fit mopar lug design. I bought an MP power brake system that mounts under the floor with proportioning valves and brake pedal. My car is unfinished as of now,but hope to complete this winter. I am running a 318 engine,904 trans and 83/4 rear end with 2:94 gears. I have used a tilt wheel from 77 chrysler cordoba. Looking forward to input or questions regarding 1939 dodge.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-27-2005 11:29 AM #2
Sounds like a neat project, keep us posted.I've NEVER seen a car come from the factory that couldn't be improved.....
-
11-29-2005 06:09 PM #3
Nice truck,gotta love that Hemi""
-
11-29-2005 07:07 PM #4
Question, I tried to upload pictures and received notice that my file exceeded 250 KB ?. Information on page states i have room for 12000 plus. I tried from 1 pic to twelve and got same responce
-
12-02-2005 08:38 PM #5
Originally posted by dannie
Question, I tried to upload pictures and received notice that my file exceeded 250 KB ?. Information on page states i have room for 12000 plus. I tried from 1 pic to twelve and got same responce
-
12-02-2005 08:39 PM #6
I have kinda figured out how to submit a pic or 2,thanks to my Daughter in law
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project