Thread: '39 Dodge D11 disc brake conversion

Tweet

Trent Plydo's # is 1-304-475-3245 The kit comes either standard or dropped 3 inches which i used also they have a Disc Brake Kit to use either Gm Calipers and chrysler rotors or you can gm rotors if want i did because i used a camero rear end out of a 81 you can use a b-body chrysler product if you want to go the other way. around here for some reason they think the older chrysler parts are made out of gold. i'll try to post a couple pixs of the front end can take the front tire of so you can get a better look . it has a 74 318 out of a Dodge Dart can get bolt on kit from plydo for the engine they also have them if you want to go with a chevy motor. Havn't cut firewall yet but will have to take the humps out. have bought the stainless to do it. will do after i get the rack put in then i can take the engine back out. also if you go with a mopar motor you will need to put a truck oil pan on it for the clearance . as for the steering columun i plan on either a chevy van columun if i can find one or a flaming river if i can't. will try to attach a couple pixs if i can .The plydo people are really good to work with but no web site.