Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: air over leaf
          
   
   

Reply To Thread
Results 1 to 8 of 8
  1. #1
    slowpoke's Avatar
    slowpoke is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2005
    Location
    Tulsa
    Car Year, Make, Model: 1940 ford Cpe, 1946 Ford B Cpe, 1953 F10
    Posts
    94

    air over leaf

     



    Anyone had any experience with this set up? I am considering it for my 40 Ford coupe. Have Chassis Engineering set up and don't want to switch to four link. Would just like some adjustability when Momma loads it down with antiques. Any thoughts.

  2. #2
    lt1s10's Avatar
    lt1s10 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2004
    Location
    rustburg,
    Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
    Posts
    4,093

    air shocks with leaf springs? what comes with the Chassis Engineering set up? 4 links want give you any adjustability when you load it down.
    Mike
    check my home page out!!!
    http://hometown.aol.com/kanhandco2/index.html




  3. #3
    Jeremy536's Avatar
    Jeremy536 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Jasper
    Car Year, Make, Model: 1967 RS/SS Camaro
    Posts
    20

    My first recommendation is going to be to go with a four link in the rear. You will get a better ride than with your leafs! However if you are just looking for a way to get back to rideheight then the air over leaf will work for you.

    http://www.ridetech.com/productinfo/airoverleaf.asp

    http://www.ridetech.com/productinfo/air4link.asp

  4. #4
    Mike P's Avatar
    Mike P is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2003
    Location
    SW Arizona
    Car Year, Make, Model: 57 Ply, 68 Ply Valiant, 83 El Camino
    Posts
    3,768

    I've been playing with the same Idea for the 57 Plymouth I'm building (I'm dreading the load the wife plans when we go on vacation).

    I haven't really looked into it too much, but have seen some advertised for light trucks that might be made to work. Personally having used air bags on coil equipted cars in the past I really prefer them over air shocks.

    Let us know what you figure out.

  5. #5
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,852

    My daily driver is a lowered truck, 4" in front, 6" in the back. I've got a set of bags in the rear that I pump up whenever I put a load in it. Works great.
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

  6. #6
    wheel-7 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2003
    Location
    west virginia
    Car Year, Make, Model: 53 studebaker coupe
    Posts
    25

    air over leaf

     



    They work pretty good.. I took two leaves out of the rear springs and added the air over leaf bags. You can put them in front of the rear axel or rear. Poor mans air ride


  7. #7
    slowpoke's Avatar
    slowpoke is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2005
    Location
    Tulsa
    Car Year, Make, Model: 1940 ford Cpe, 1946 Ford B Cpe, 1953 F10
    Posts
    94

    Thanks guys. Just what I wanted to know. I believe I will try a set on my 40.

  8. #8
    R Pope is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2005
    Location
    Eston
    Posts
    2,270

    Be sure to hook up an on-board compresser. Don't rely on service station air hoses, they're never around when you need one.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink