Results 1 to 3 of 3
LinkBack URL
About LinkBacksThreaded View
-
09-30-2005 03:02 PM #3
CHR Member/Contributor
- Join Date
- Dec 2004
- Location
- TX
- Car Year, Make, Model: hotrod
- Posts
- 1,830
Just got frame back from alignment shop,and it's perfect. So, now its time to set frame up for drag racing,and some street use.I found some trailing arm reinforcements, and wanted to take off the stock panhard bar,and install a wishbone locator to keep the rear end straight in line.I also found some reinforcements for the frame which I am going to do,to keep twisting down, Also a anti roll bar for the rear.Truck is lowered 5 in the front,a 6 in back.Oh ya almost forgot the front end is going to be fiberglass.Everything from cab foward is going to be fiberglass,except for bumbper.Is there anything I am missing(besides safety equipment) for the frame set-up? street strip.Last edited by BigTruckDriver; 09-30-2005 at 03:10 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!