Thread: Setting caster and camber
Results 1 to 15 of 18
Threaded View
-
09-07-2005 06:10 AM #1
Setting caster and camber
I've got a stock mustang II front end I want to align, and I have been looking for some tips on how to do it right. I haven't had much luck.
I purchased this caster/camber guage.
http://www.speedwaymotors.com/xq/asp...qx/Product.htm
My biggest issue at the moment is figuring out how to set the caster. What part of the spindle do I use to measure the angle from? There are a couple of flat machined spots on the spindle, but i don't know if they are "level" with the spindle. The only way i can figure is to cut a piece of angle that would rest against the ends of the upper and lower mounting/pivot studs and measure it that way.
Does anyone have any links or tips that might help me out?Andy
My project build video:
http://www.youtube.com/watch?v=iubRRojY9qM
I see a picture of his clutch setup.
random stuff