Thread: flattie carb question...
-
07-21-2005 09:09 AM #1
flattie carb question...
hey gang.. ok here goes..
can i use a super dual inlet manifold and two Y branch carb adapters on my mildy hopped up '37 21 stud flattie motor??
jus askin cause i have 2 NOS holley 94s and 2 Nos stromberg 97s...is there anything wrong with mounting one of each one each of the Y's?? i like the idea of the quad setup but jus wondered if it would suck..
silly question i know...but i am curious.8TH ANNUAL RATFINK PARTY & KUSTOM KULTURE EXTRAVAGANZA - 21TH JULY LOS ANGELES COUNTY RACEWAY, PALMDALE CA.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-21-2005 10:10 AM #2
If you found four more "Y" adapters and four more carbs.....
Four carbs on a flathead seems like a bit much. Get it running with two carbs and then, what the heck, try it......the linkage will be a nightmare as will the balancing of the carbs.
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project