Thread: ifs newer jag sedan
Results 1 to 1 of 1
Threaded View
-
04-30-2005 05:00 PM #1
ifs newer jag sedan
I picked up the upper and lower A arms, spindles, calipers, rotors tie rods for a C note from my local car crusher from a late model jag sedan. forged a arms, 11 1/2 inch brakes. The design is better than the old xj6, Has anybody used one on a street rod. there is limited adjustment with shims at the upper 2 piece A arms. The inner long a arm bolts run fore and aft with built in anti dive angle, similar to most mustang II. the problem is lack of camper adjust in their design, i was thinking of fabbing the brackets and using the upper bolt down to slots like mustang II. OR BUILDING THE ECCENTRIC SLIDER. ANYONE TRIED NEWER JAG?timothale
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40