Thread: ifs newer jag sedan
-
04-30-2005 05:00 PM #1
ifs newer jag sedan
I picked up the upper and lower A arms, spindles, calipers, rotors tie rods for a C note from my local car crusher from a late model jag sedan. forged a arms, 11 1/2 inch brakes. The design is better than the old xj6, Has anybody used one on a street rod. there is limited adjustment with shims at the upper 2 piece A arms. The inner long a arm bolts run fore and aft with built in anti dive angle, similar to most mustang II. the problem is lack of camper adjust in their design, i was thinking of fabbing the brackets and using the upper bolt down to slots like mustang II. OR BUILDING THE ECCENTRIC SLIDER. ANYONE TRIED NEWER JAG?timothale
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Well I've sure gotten old too so don't worry about it! I've had two bypass surgeries, new knees, fought prostate, cancer and diabetes. I'm half blind, can't hear anything quieter than a jet engine,...
the Official CHR joke page duel