I have a 50 chevy 1/2 and I am currently and just got done mocking up a front end from an 80 chevy 1/2
so far so good, This is my first swap so Im going to have a friend check my work before I drill my bolt holes.
I also used the rear end , power steering and mastercylinder

It is pretty much a bolt in install , just have to add 1/2 inch spacers between the frame rail and the crossmember and 1/2 spacers for idler arm and gearbox.

I am just worried about getting the camber right

I hope it works because I have so much time and effort in it now other wise I would probably consider s 10 frame also but I do like having the heavier suspension because Im thinking about a 429 Caddy motor

Good Luck