Results 1 to 10 of 10
LinkBack URL
About LinkBacksThreaded View
-
03-27-2005 10:27 AM #9
CHR Member
- Join Date
- Apr 2004
- Location
- Little Elm
- Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
- Posts
- 3,890
The Panhard bar is not necessary if you use the diagonal link. Either one can be used to keep the axle centered. I prefer the diagonal link because the Panhard bar moves the axle side to side under suspension travel. The diagonal link does not.
Just make sure that the brackets are welded properly to the rear axle. Warping can occur, then the rear-end becomes a bearing-eater. Usually, the welding is done on a jig that keeps everything aligned.
I used that same setup on my '72 Chevy pickup.Last edited by Henry Rifle; 03-27-2005 at 10:36 AM.
Jack
Gone to Texas
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
This site is up more often lately, but very little traffic.
Dead!