Thread: Shock mounts- again
Hybrid View
-
01-22-2005 07:30 AM #1
Shock mounts- again
Thanks for the response. I can't find the thread you describe. Must not be squintin hard enough.
-
01-24-2005 09:48 AM #2
Shock mounts
Thanks.
Sadly this doesn't scratch the itch. I crawled under the old beast and then mocked up a frame mount. Now, the problem appears to be clearence with the steering arm. I have a 70 Mustang box, and steering arm attaches to the spindel in front. I can see that clearence will be a concern as the arm travels through its arc. It seems that the shocks will need to be virtually upright, and that raises the question on an appropriate lower mount that won't create a ground clearence problem
Anyway, I'm working on it.
Anyone have a thought?
Paul
Moving on to next phase of frame reconstruction . Due to the Trans location I need to build a new center section for the X member. 1st cuts have been made . [/URL] I will use this 6"dia. ...
New Project