Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree4Likes
  • 2 Post By Navy7797
  • 2 Post By rspears

Thread: Ford R&P to GM Pump question
          
   
   

Reply To Thread
Results 1 to 3 of 3
  1. #1
    Larry38HA's Avatar
    Larry38HA is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2016
    Location
    Clarks Summit
    Car Year, Make, Model: 1970 Pontiac GTO Hard Top Coupe
    Posts
    4

    Ford R&P to GM Pump question

     



    Hi Folks,

    My '38 Chevy street rod has an MII IFS setup. I'm using a Saginaw "ham can" style pump from a '74 Camaro. Of course, my steering rack was "twichy" beyond belief, because the Ford racks use much less pressure and volume than GM boxes.

    I know that I can address the twichy feeling by substituting a flow reduction valve for the original in the pump. I can also control max pressure with the Borgeson shim packs.

    I'm going to install the flow reduction valve in the pump, but don't want to do the shim pack part if the rack can already take the pressure. I suspect that on the wrong rack, doing shim-based pressure reduction would reduce the pressure to an unacceptable level, making the rack hard if not impossible to operate.

    So, here's my question: I heard that, at some point, more modern Ford racks can take the higher pressure from the GM pumps without modification. I don't know when that time period was or what models are included. Do any of you?

    The replacement rack I'm about to install is a Cardone 22-201F. It's a variable ratio rack, that was fitted to:
    '78 - '79 Fairmont
    '79 Mustang
    '74 - '80 Pinto
    '75 - '80 Bobcat
    '79 Capri

    I'm just trying to figure out if this rack is one the higher pressure models or do I still need to do the shim modifications in addition to flow control.

    Thanks,
    Larry

  2. #2
    Navy7797 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2013
    Location
    Seguin
    Car Year, Make, Model: 1940 Ford p/u
    Posts
    727

    Larry38HA I don't know about the new ford racks but I use a GM pump with the restricting valve on my T-bird rack (older model) and it works fine so far. good luck
    Dave Severson and 36 sedan like this.

  3. #3
    rspears's Avatar
    rspears is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    No big deal at all, and the reply adds information on an approach, but Larry's question was June 22 2018, a bit over 3 years ago. Answers provided may help someone down the road, but I expect Larry figured out what he needed.
    Dave Severson and 36 sedan like this.
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink