1979 corvette - Flamethrower Exhaust?????

[TheWrench]

So Id like to put a duel flamethrower exhaust on my car but i really dont want to spend the sevrel Hundred Dollers the guys at the store want me to pay. I know i could do it myself with the right guide and Parts - but im wondering if someone could maybe explain or send me to a web-page that would explain how to do it yourself.

Any feedback would be appriciated!

Thanx

[evil666greaser]

i can send you pix of the kits i make for our club cars and wiring diagrams... depending on whether you want to go for the 'afterburn' style kit or the 'injected' style... i do both.. i can also supply you with a cracker box and the neccessary parts....for approx 130 USD.. choice is yours.
gimme a shout if you want more info.

[madgrinder]

for "flamethrowers" and you will get a play-by-play of my home-built kit and where to get the parts.

[deepnhock]

I just love it when the plastic car guys want to play with fire
Jeff

Originally posted by TheWrench
So Id like to put a duel flamethrower exhaust on my car but i really dont want to spend the sevrel Hundred Dollers the guys at the store want me to pay. I know i could do it myself with the right guide and Parts - but im wondering if someone could maybe explain or send me to a web-page that would explain how to do it yourself.

Any feedback would be appriciated!

Thanx

[evil666greaser]

lol...yeah gotta love the smell of a flamin rice wagon.

[deepnhock]

So, all I did was get these freebie instructions off the internet about putting a 'T' in the gas line and running a hose back to the tailpipe... Did it all for less than $25...
It was so cool!

Originally posted by deepnhock
I just love it when the plastic car guys want to play with fire
Jeff

[evil666greaser]

LMFAO... yeah... suprisin how sooo many ppl think thats all thats involved...

[deepnhock]

So, I printed the 'net instructions and put it all on...
Went over to my girlfriends house to show her dad that I was too all grown up. But before I got to her place, I stopped by the burger place..You know, the one in town next to the fire station. Yeah, that's the one....
Anyways.. The whole gang is there, so I cruise around the block and get close...real close..
Wait for the light to change....idle over to the curb...stick 'er in first gear... blip the throttle....hit the valve and switch...

That's when it happened

Originally posted by deepnhock
So, all I did was get these freebie instructions off the internet about putting a 'T' in the gas line and running a hose back to the tailpipe... Did it all for less than $25...
It was so cool!

[evil666greaser]

ok ok enough already... my sides er a hurtin.

[evil666greaser]

heres a pic of the 'cracker' boxes i make..... dual 'tuned' flasher relays( change resister inside to spark quicker..approx 20 times a second)..two relays used for safety,incase one screws other still works.... grey n red wires to dash... black n red to coil....green n brown to fuel pump n fuel shut off valve (if used)...led on switch to show operation n monitor sparking.

(lighter in foreground to show approx size..)

[evil666greaser]

internals....... As i said before these are NOT normal relays...they have been modified. a regular flasher box will not operate at a frequency that is safe to use with flame kits...

[deepnhock]

Pretty neat work.
Who taught you that, the Unibomber?
Jeff

Originally posted by evil666greaser
heres a pic of the 'cracker' boxes i make..... dual 'tuned' flasher relays( change resister inside to spark quicker..approx 20 times a second)..two relays used for safety,incase one screws other still works.... grey n red wires to dash... black n red to coil....green n brown to fuel pump n fuel shut off valve (if used)...led on switch to show operation n monitor sparking.

(lighter in foreground to show approx size..)

[evil666greaser]

after burn kit show supply in.. cracker internals... feed to coil..and coil to plug.

[evil666greaser]

Lol.... well i'm afraid i cant reveal my sources *Looks nervous*
Oh ok then... I have worked as an aeronautical technician in the past and understand the principle, my Bro is an engine developer/technician for an automotive Co. and our resident electrical whizz sorted the slow spark problems.... i will post more pix of the injection unit similar to that i have on my 55 Roadie..

[deepnhock]

Really, pretty neat work
Only thing I'd like to see is the switch be remotely mounted.
I see the need for a box to stuff the guts in, but I'd hide the box and trip the switch off the dash somewhere's unobtrusive.
Jeff