Originally posted by Don Shillady
I don't want to strip the threads, sooo does anyone know what torque I should use on the bolt or have the GM manual for mid-80s GM brakes that tell the torque?
Try this:

http://www.carcraft.com/techarticles/116_0307_baer2/

"...and then install the Teflon-lined braided flex hoses. The flex hoses thread onto the adapter fitings on the axletube and mate to the calipers using banjo-type fittings. Make sure to use a copper crush washer (included) on each side of the banjo fitting and torque to 15-20 lb-ft; over-tightening will break the fitting bolts."