Originally posted by loctite
I have An Offenhauser intake with 3 Rochester carbs. I have a power brake booster, 350 turbo trans and a Vac adv dist. The center carb has a fitting in the base plate and a nipple in on the top side. The front carb also has a nipple on the top side. Not sure but there is about a half inch fitting at the top rear of the offy intake. I need to know the best place to hook up the power brake booster vac, the dist and the trans shift valve. Thanks!!!!

the best place would be off of the intake for the booster and trans . as for the dist that would have to come off of the carb. depending when you wont vac. if you wont vac. at idle then go to the base plate, if you wont vac. when you acceierate use the nipple on the top side. hope this helps