Originally posted by mrmustang
Did you put any thread sealant on the bolt in question, as some of them do go through water passages. For all of the center bolts(two on each side minimum), I suggest using thread sealant.

Bill S.
No... I thought about that last night. I did put thread sealant on the head bolts but not the intake when I reassembled it. This is not a center bolt but the 2nd one back on the front passenger side of the motor. I guess I'll just try it again with new gaskets and thread sealer if you guy's don't think I missed anything the first time.

Thanks for the help.