Ok well I tried what you told me to do about the frozen caliper and spining the wheel, etc and both sides worked perfectly. I got to go and try the part where when you release them if they stick or not but I know that the left one does do that and I did both sides a few times and when I had my dad let off I spun the other side and none seemed to be sticking though but maybe I should do it again. I doubt that's it though because like I said neither side had a problem and they seemed to work fine. I also checked to see if any side had any oil or grease and they didn't so that's not it either. I am thinking that the rotor might be warped or something because that's the only thing that I can think of now. Any other suggestions? I would try to eliminate the back brakes but I don't have a emergency brake in the middle where I can pull up on it and drive in reverse a bit to see if that's it. Any more suggestions would be great help. Oh yeah also the hose doesn't have a kink in it and if it did then it wouldn't be doing that.
Thanks.