Finally figured out my ignition system

Ok, First of all, I need to thank all who gave me ideas and help. I found out that I wasn't turning the ignition switch in the right position to engage the coil, has to be the middle and not the last position, still won't run but, my dad says to put points and a new condensor in and, it should fire up. It does have spark under the dizzy cap if you look at the points contacting just not very well and that spark dosen't make it's way to the plugs. green lights worked off the coil's power 2 after I spliced it back togther, the fuel pump came in today and, that will go in sometime this week, the car should run/drive by the end of this week.:) .

Very cool Matt, I wouldn't expect tremendous spark out of that old 6 volt system. You may have to put on a wire or two here and there. Any bad wire will increase resistance and take away from your power. Sounds like your on the right track, good luck.

I got my points&condensor today for $17.99 at Reds Auto Parts, our local Carquest. The points and the condensor are not conected, if that's what u mean by " Uni-Set ". What Trans fluid do I use? Just somthing that says " For use In Chevrolet Vehicles " or is there special fluid for this old tranny.

Hey Matt regular 90 w gear oil in the tranny, My very first car was a 50 chevy 2 door we called her old Maud cuzz thats what the original owner had named her...

Matt,


As I remember your original post on this car, it is an automatic. Don't even think about the 90 weight. In the old days there were two type fluids, F and I done forgot the name of the other. But it was the one for GM's and Mopars. I believe any of the new Fluids read on them that they replace that type so they should be okay in the old Powerglide.

Wow..... glad your watching oldford100man, I now also remember him saying it had an old powerglide...kinda rare I guess as the only ones I remember seeing had 3 on the tree....
Sorry Matt..............

And "G" was the other type " correct ??? .... I think, that is what dextron /mercron III is .....? not sure .... thou ....
maybe some one else can explain and clarify for us ...


Matt keep posting progress ! ... " I'm very excited for ya ! "
I love this part ! ..... When you first get it home and start cleaning it out and playing around with everything !!! ... :D "just 2 C" :LOL:
It just gets better 2, if you take all your mistakes in the right light and keep going .... :D

Matt

Don't be suprised when you get her running to find out that it starts off in drive in the drive position and low in the low position. The first Slipandslides (Errr, I mean Powerglides) didn't use low at all in the drive range. Just so you don't think something is wrong when you drive it. :) :) :)

Thanks to all for your help. Thanks for the trans shift information Oldf100fordman.

Thanks to all for your help. Thanks for the trans shift information Oldf100fordman.

I will try to get the points in tonight and fire it up, can't wait for that big moment.

Thanks for the tranny fluid info Streets. We got the points in my car, tried to fire it up and, it fired right up, ran pretty smooth but, we still have to gap the points a little bit more arcuttly.

hey, it runs. Cooollllll.

Congrats Matt!!!

Hey, its running! cool, good job matt. To bring back an old saying of my own "ITS ALIVE!!!! HAHAHAHA!!!!"

Got to put the fuel pump on still, didn't get 2 it like I thought I would, was out friday night/ all saturday. Yes we do have a Dwell meter.