Hybrid View
-
12-09-2020 08:03 AM #1
Door glass replacement 50 chev 3100
Q: best way to remove glass from frame, and what to use to adhere new glass?
-
12-10-2020 07:22 AM #2
Welcome to CHR! I've not messed with a Chevy of that vintage, but the only door glass I did long ago just had a strip of flat rubber, almost like a tire inner tube with the width equal to the inside measure of the channel. Seems to me that to get the frame off I used a piece of 2x4 against the glass and rapped it with a hammer. The channel was narrower at the open side, making a tight friction fit pinching the rubber to the glass.
There's several YouTube videos of door glass on Chevy trucks of that time. Have you done any Google research?Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
-
12-10-2020 04:50 PM #3
After 2 hours I finally removed the frame from the old glass..rust, and a ton of silicone were the culprits...used a torch, and a soldering gun to get it off. Youtube does not cover installing the glass into the frame. thanks for the reply
-
12-11-2020 12:12 PM #4
Factory manual says to squirt gasoline on the rubber in the channel to soften it up to remove. Use light weight oil to re-install.
1948-51 Chevy Truck Shop ManualIt's All Good
-
12-11-2020 02:33 PM #5
^^^ Nice source!
-
12-14-2020 11:48 AM #6
done..new tempered smoked glass, new channels. looks great
-
12-14-2020 04:51 PM #7
On a bitterly cold winter morning a husband and wife were listening to the radio during breakfast. They heard the announcer say, "We are going to have 8 to 10 inches of snow today. You must park...
the Official CHR joke page duel