Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree6Likes

Thread: P6T Chevy van fuel pump
          
   
   

Reply To Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 38
  1. #1
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    P6T Chevy van fuel pump

     



    Does anyone have experience with a 1990 Chevrolet P6T van electric fuel pump?

    This van has an electric pump in the tank and a mechanical pump on the block. The mechanical pump has a fuel return line which makes me think it's supposed to have both.

    No voltage to the tank pump. The fuse block has a 10A fuse labeled tank f/p which is hot.

    Also the sending unit doesn't work. I tried some contact cleaner on the wiper arm, no help. It shows open regardless of position.

    Having trouble finding parts. I haven't put juice to the pump yet, I was going to replace it as a unit.

    Comments and suggestions?
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  2. #2
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    Y'all are going to join me in a Homer Simpson forehead slap - DOH! when I tell you what I figured out on the fuel pump: of course it isn't getting juice, the engine isn't running! The pump heavily resembles that from my 73 vega, and a vega sends voltage during crank and when oil pressure switch is made. So, I checked for voltage while cranking and yes! It's on a relay. So, I'm ordering a vega pump, as the old one is dead.

    As for the sending unit, I carefully disassembled it and cleaned contacts with 100 grit sand paper, and it looks like it's going to work.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  3. #3
    HOSS429's Avatar
    HOSS429 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2007
    Location
    New Market
    Posts
    2,590

    glad we could help ..
    iv`e used up all my sick days at work .. can i call in dead ?

  4. #4
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    Just bouncing stuff off y'all is helpful, or at least therapudic.
    It's a bit surprising, but the fuel pump is absolutely the same as a 74 Vega. Unfortunately, it didn't come with a sock, so more delay while I order one.

    I'm only saving about $20 with having to buy the pump and screen. I'm beginning to wish I had just got the whole assembly.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  5. #5
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,297
    Blog Entries
    1

    That sounds like my kind of luck too. Haha
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

  6. #6
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    This one's fighting me.

    Got the tank back in, but it still won't run.

    I'll dig in deeper tomorrow.

    But, the good news is that the fuel guage works, so does the oil gauge.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  7. #7
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    You posted that you ordered a VEGA pump-----------your vega was carb or FI? what is the van-carb or FI? if you are trying to run a FI engine on a carb pump pressure it won't work-------Try starting the engine by spraying starting fluid into intake--hell, I've done it with my mother in laws hair spray while down in the Ga mountains-----------

  8. #8
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    74 Vega has a low pressure in-tank fuel pump, feeding a Holley 2bbl.

    This van has the same low pressure pump in the tank, feeding a mechanical pump with a return line.

    The engine runs fine if i pour gas in the carb.

    I should have bench tested the assembly before installing it in the tank.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  9. #9
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    The pump for a carb will not work for fuel injection------check your pressure------

  10. #10
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    OK, got back on it today. I broke loose the line at the carb, splashed some gas down the bore and cranked it. I got good strong spurts from the fuel line, so fuel is getting to carb fine.

    I shut it down, tightened the line, and restarted while shining a light into the carb. Only the front left bore is getting fuel. It's almost enough to maintain idle. Looks like the carb needs rebuilt. No surprise there. It would have been a small miracle if it didn't, after sitting for years.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  11. #11
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    ok, now we know the engine has a carb-------is it a 2 barrel Holley?

  12. #12
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    It's a 427 with a 4bbl.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  13. #13
    jerry clayton's Avatar
    jerry clayton is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2006
    Location
    Bartlett
    Posts
    6,831

    What brand/number carb?

  14. #14
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    It's a holley. Don't have it off yet, to get #s.

    There is still a shop in Columbus that does carbs, I was going to let them build it.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  15. #15
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    There are sure a lot of vac lines on this thing.

    Got a tip for how to keep track of them?
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

Reply To Thread
Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink