Thread: 99 - 07 Chevy Pickup Fuel Fill Neck in 37 Buick

Tweet

Thanks for the suggestion. I am going to try that. I've bent a 1/2" od conduit to the required shape and I taped 2" OD foam insulation on the outside to check fit. The problem is the local muffler shop that everyone raves about says they can bend 4 inch radii on 8 inch centers and my required shape is tighter than that. Just looking for a backup plan.
Thanks

Originally Posted by Mutt's37Buick

Thanks for the suggestion. I am going to try that. I've bent a 1/2" od conduit to the required shape and I taped 2" OD foam insulation on the outside to check fit. The problem is the local muffler shop that everyone raves about says they can bend 4 inch radii on 8 inch centers and my required shape is tighter than that. Just looking for a backup plan.
Thanks

Get some header bends and make your own pipe....
Mandrel Bent 180 degree U-Bends & J-Bends

.