Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree7Likes
  • 2 Post By techinspector1
  • 4 Post By Henry Rifle
  • 1 Post By Rrumbler

Thread: Muncie 4 Spd Question
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    rdobbs is offline CHR Member Visit my Photo Gallery
    Join Date
    Feb 2007
    Location
    springfield
    Posts
    383

    Muncie 4 Spd Question

     



    I have an old Muncie 4 spd that has been setting in shop
    for about 25 years. I took it out of my 57 Chev because
    it was jumping out of 4th gear. I think it's a 1967 or 1969
    model. Just wondering if it's even worth the time and expense
    to go thru this thing? Have a Saganaw 4 spd in a 76 Camaro
    now and it's a piece of junk.

  2. #2
    techinspector1's Avatar
    techinspector1 is offline CHR Member Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    Judging by the cost of 4 and 5 speeds today, I'd say it's worth rebuilding.

    .
    Henry Rifle and Rrumbler like this.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.

  3. #3
    Henry Rifle's Avatar
    Henry Rifle is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2004
    Location
    Little Elm
    Car Year, Make, Model: 34 Ford Low Boy w/ZZ430 Clone
    Posts
    3,890

    I agree with Tech. I had one in my '68 GTO, ran it until it wore out, rebuilt it, and ran it again. It held up to a lot of added horsepower. Now where did I put that broomstick that I used to hold the loose roller bearings in place while I installed the countershaft????
    Jack

    Gone to Texas

  4. #4
    Rrumbler is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2004
    Location
    Las Vegas
    Car Year, Make, Model: Sans hot rod, sold the truck.
    Posts
    1,207

    I'd certainly say it's worth rebuilding; a simple, basic design, and relatively stout.

    .
    Henry Rifle likes this.
    Rrumbler, Aka: Hey you, "Old School", Hairy, and other unsavory monickers.

    Twistin' and bangin' on stuff for about sixty or so years; beat up and busted, but not entirely dead - yet.

  5. #5
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,297
    Blog Entries
    1

    It's junk you better just send it to me. Just kidding. The value on them is still pretty high up there. It's worth it to rebuild it and keep it for sure.
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink