Thread: Borla EFI with 502
Results 1 to 2 of 2
LinkBack URL
About LinkBacksThreaded View
-
03-15-2015 09:23 AM #1
CHR Member
- Join Date
- Jan 2015
- Location
- Rochester
- Car Year, Make, Model: 34 Chopped Ford Vicky; 41 Willys; 55 che
- Posts
- 20
Borla EFI with 502
in the process of putting a Borla EFI eight stack system on my 502.
initially had problems finding the right sensors, but now struggling with the TV cable. Both accelator and TV cables were too short and had to be replaced. Now fabricating attachments to the wheel crank
To operate the throttle body. If anyone has experience with this system on a 502 any advice would be appreciated. Jeff
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance