Thread: borla EFI on bbc

Tweet

I am with RS on this,.......had no idea they were in the EFI either. A few things I can tell you about going to EFI from a carb is you must have an electric pump either in the tank or on the frame. Have to have a return line for the fuel back to tank. And it is a good idea to put a gauge inline to show pressure which you can regulate.
I helped 2 friends put EFI on their rides, one was a FAST and the other a Holley. Also give yourself a good day to get everything done and then take for a ride.

Thanks. Will be putting an Aeromotive phantom in tank fuel pump with a post pump filter.
Will be using a pressure gauge and return line
Probably need to change out the big mechanical distributor because of room and use either oval and rectangular gaskets (or a special gasket available through Hilborn) to provide the necessary seal between oval heads and rectangular intake manifold..Need a O2 sensor in exhaust manifold. Will be using the FAST 2.0