Thread: 454 finished wont start help!!!
Results 1 to 15 of 16
Threaded View
-
11-25-2014 09:18 AM #8
Given that I'd probably pull the distributor and using a good VOM meter check continuity between the center coil terminal on the cap to each of the plug terminals on the distributor, and then check continuity of your plug wires. If you have continuity, look at the possibility that you've perhaps severely fouled the plugs? Maybe it's worth buying a good set of plugs (I like NGK's), confirm TDC on compression for #1 and re-install the distributor. I'd be frustrated, too.Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.





17Likes
LinkBack URL
About LinkBacks
Reply With Quote
This site is up more often lately, but very little traffic.
Dead!