Thread: Building 89 460 for 500 hp

Tweet

you will be fine with a cast crank the scat 9000 is nice crank it is about $440. with shipping and for china 4340 steel is 660.to 1100. then a usa made would be more. i would look at the 4340 steel if you think your going to use a power adder i am dealer for all after market cranks. need any help let me know. i move to the callies magnum crank for any thing over 800hp with a power adder.a good crank use them in the big engine builds here is one i did not to long ago did the 4.500 crank cast steel icon pistons scat I beam rods did some low buck thing like fill the EX cross over made up a baffle in the pan i told him how to do it and what to do save some money we .plug the two center hole in valley . spent abit of time cleaning up the inside of block working on drain back from the heads some other stuff then i tru -deck it with the bhj tru-deck setup . i then bored and honed it with a tq plate on the deck. small sold roller cam with morals hippo liters . the guy never had a 460 out this big every time he stop by he tells me how it runs