Hi Gang, It's been quite a while since I posted here, hope you will forgive my absence. I have a 53 Studebaker that has a 68 Nova front clip. At some time a previous owner installed dropped spindles on it. I have discovered that they were not the correct spindles for the rear steer Nova suspension, but actually spindles from a front steer suspension and had been installed backwards, ie the right spindle on the left side and the left spindle on the right so the tie rods could be connected. This actually worked, but not as it should because the tie rods and lower control arm were not parallel resulting in bump steer, poor alignment and tire wear issues. I finally figured that out and have installed correct spindles. Now I am trying to figure out exactly what these spindles do fit so I can offer them for sale. My initial thought is for a second generation Camaro (70-78) but they don't look quite the same as images I have found. Here are some pictures









There is a casting that appears to be ST, thinking that may be a manufacturer I have Googled "ST spindles" with no luck. The casting directly below the spindles is E37L; L for left, and E37R, R for right. The is another number cast on the steering arm 050594, same on both.

Thanks in advance for any help you can offer. I will try to make my visits here more frequent in the coming year, call it a New Years resolution!

Pat