Quote Originally Posted by mooneye777 View Post
That's the best type gasket to use, good choice. If you get the pan and pickup verified and it all checks out. Your problem could be a bearing clearance issue and that's my guess on your problem. Does it stay at 10 psi even under a load, meaning during acceleration ?
nope still could be others things not just bearings but no one reads any post s as this was covered way back . still ten pounds at idle is ok but that was in some post on this . that gasket is ok comes with the helping hands with the gaskets did many with out the one pc gasket that gasket takes all the fun out of the job