Quote Originally Posted by falconvan View Post
If you're just wanting rubber sheet goods look up a company online called Rubber Cal. I've bought several different types of rolled rubber mats for car and industiral projects. I did the whole floor of a stepvan I built a few years ago with thier products and it came out great.
Rubber sheets can't be beat for an inside job, but if you're planning to go topless (you state in Post #1
This will be used for mainly hunting and summer driving with top off
and let it get wet then water will pool in low spots under the rubber and eventually you'll get rust. You need a product that bonds to the metal, not something laying on top.
Also, you mentioned you "...have sprayed in rustoleum primer to minimize the rust". In my experience rustoleum does OK for bare metal, but it's really best to use one of the "rust converter" products out there to stop the oxidation before covering with any finish. You may not be that concerned, but thought I'd mention that priming over active rust can be a disappointment down the road, from my experience....