Quote Originally Posted by sfort View Post
Does your stabilized have a eye on one end and a straight threaded shaft on the other? If so you could use a piece of 2" angls and two 1" U bolts. You may try a 4X4 shop. This is a typical add on for off roaders.
Like sfort said, here's a picture of a "kit" from SkyJacker for a threaded shaft stabilizer.

Stabilizer.jpg

You can make the angle brackets, or a 4x4 shop likely has piles of them laying around either new or used. My 4x4 guy has an extensive bone yard out back, and he welcomes browsing by his customers.