Quote Originally Posted by Dave Severson View Post
If it's a tube that got warped out of shape from welding, it can be straightened in a press. If an end is on crooked, it will have to be cut off and rewelded. You'll need an alignment jig to check it and see if and where it's bad.

Do the axles slide in and out of the housing easily, or is one or both binding when taken out or installed?
We were on the way to a car show and when I slowed down for a traffic light I heard a loud growling type noise . did it two more times so we pulled over called a rollback and had it taken to buds house where he has a lift . On the lift we noticed oil /grease on the dr side tire ,looked like seal was leaking . After removing the tire and removing the axle bolts we had to struggle a bit to make the axle come out .Don't know if i would call it a bind it just seemed to be tight then all of a sudden it popped right out .Ran out of time Sat eve and did not work on it today .Maybe I should pull the other one to see how it comes out . Thanks for the info guys .