Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 71chevelle/with 72SS gauge dash fuel gauge wireing help new harness&circuit board
          
   
   

Reply To Thread
Results 1 to 3 of 3
  1. 01-13-2012 08:54 AM #1
    gary carpenter
    gary carpenter is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Nov 2011
    Location
    warwick
    Posts
    1

    71chevelle/with 72SS gauge dash fuel gauge wireing help new harness&circuit board

     



    the old circuit board had 3 wires for gas gauge that were cut not used also a white resister on 2 terminals does the new circuit board need it I havent installed the new wire harness or board yet realey need gas gauge dont want to ruin new board also can i install factory tacometer wire to H.E.I. ignition Thank U for in advance for helping gary C
    Reply With Quote Reply With Quote
  3. 01-13-2012 09:47 AM #2
    cffisher's Avatar
    cffisher
    cffisher is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    Welcome to CHR I don't have a wireing diagram for that car but I'm sure sombody will be along with an answer or opinion
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training
    Reply With Quote Reply With Quote
  4. 01-13-2012 02:57 PM #3
    Trjohn57's Avatar
    Trjohn57
    Trjohn57 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Sep 2010
    Location
    Brandon
    Car Year, Make, Model: 1969 GTO 455 78 FLH 37 Pontiac
    Posts
    504

    I can only say that I have a normal tach in my 69 GTO wired to an HEI distributor and it works great.
    The gas gauge needs 3 wires hooked to it. One to Sending unit. Another hooked to ground and the 3rd hooked to Ignition to work.
    Last edited by Trjohn57; 01-13-2012 at 03:00 PM.
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink