Quote Originally Posted by 34_40 View Post
Yes, the frame around the glass needs to come off for the rubber seal replacement. But, it's captured in this frame that we need to remove.
I'm sure Bob's right on the L bracket joints. My reply was based on the description of the Speedway offering, where they say the piece is "solid". I anticipated that the method of installation would be to insert the rubber seal, run a piece of small rope around the U, and then with the frame on a solid flat surface put the glass on top, apply a gentle downward pressure and have a second set of hands pulling the rope out to roll the seal over the glass. It'll be easier if the top comes off.