Thread: Benchtop Grinder for polishing

Tweet

I have a jacuzzi motor with a buffing pad. Not sure what the rpm's are, but it's really fast. What I did was use an old sewing machine pedal to control the speed. Cffisher isn't kidding about holding onto that part tight. Long pieces can be a bummer to do. The more pressure you put onto the wheel with the piece, the more different it's going to look. A bench grinder will work. You might have to put a small piece of pipe over the rod to get the pad to stick out further. Good luck. Practice makes perfect. I should add that buffing will not take out any scratches. None. Wet sanding will.