Thread: Painting an engine.

Tweet

The next step was to prime the parts and Dan laid on one medium and one slightly heavier coat and let that cure for an hour. Here are some pictures of the same parts primed.

Don

After the primer flashed for an hour Dan topcoated it with two coats of the final gold color. We like Imron a lot, it is easy to spray, flows in nicely, and it tough as nails. Here are the parts with the final gold color applied. Of course, we had to push the motor in front of Dans RPU body to see how the gold went with the black body and off white firewall. I think it will make a real difference in the look of the car.

Don