I'd measure with them on a bench(or kitchen table)
Printable View
I'd measure with them on a bench(or kitchen table)
Hang in there Don, you guys are so close
At least study the tidal charts so you know when to jump off the bridge
if you check with heads on the engine with valve spring s on heads with rockers and push rods in you can not check this with hyd lifters as lifter will collapse . so away you check this you must understand that the springs on heads now will give a false read for any max lift checking of valve train for any interferences
Too confusing for me, we are just going to trust the guy who did them and go with it. He builds some serious motors, so I trust what he did. Thanks for the input though.:)
Don