Dave, did you paint it yourself or have someone do the finish body work and paint?

I'm not sure I have the patience for all that sanding etc. and as you can see not only was my truck NOT virgin steel but a poor old hag of a truck, but hey, I only paid $20.00 for it when I bought it.

I'm not counting the fact that she was in a 2 car dirt floor garage with one door and, you guessed it, she was on the no door side sunk 6 inches into the ground with about 100 old drive shafts piled in and around it. It took me 3 days to find it in there and then jack it up and move it to the open door. I actually got the old gal running for a short time on her original flat 4 banger, unique engine sound for sure! Needless to say she's was missing at least 3 inches of sheet metal most of the way around.

I just finished putting cab corners and the bottom of the cab in this weekend, but I have a pucker in the back I need to remove, something was either a little to long or a little to short but with nothing to go by and my lack of experiance with something that bad it was miraculas it turned out as well as it has.