Thread: Is Paint Susposed to Chip ????

Tweet

yep like others said it looks like piss poor prep . this would not help on this but i will throw it out there . on some things i make my own washer out of 1/8 plate stainless steel with a small hole saw sand and buff them then i round the edge off so they will not cut in or cup ,a washer is stamp out so it can be sharp on one side but you may not like the sharp end up to look at so i have sanded the one side with sand paper i use stick it sand paper and stick it on the work shop table .on very small bolts you can buy clear washer that can go under a pan head screw or washer .i used what we called spaghetti calk .was made by 3m in gray and black used alot of it for beding in parts that did get bolted on the body . clean up with dx330 cleaner the real name was i think strip calk messy but work good