Thread: Need Help Wiring, Urgent!

Tweet

Hey, I am new to club hotrod but not new to old school muscle cars or vehicles in general. I grew up around vehicles my whole life and My first car is the 88 FC rx7 with a SBC350/700R4.

Heres my dilemma, The motor ran off the original ECU and i tore the car apart because 2 Years ago Mice had gotten into the car and made a nest around the 13b ECU, Eating away the wires. The Distributor is HEI, and Honestly I do not know how to wire this motor from Scratch, Starter, Alternator, Distributor, Ignition and where to add my safety neutral switch or Relays.

For the moment I would love to get this motor running since it has been sitting for 2 solid years. I have a fear that it will push smoke when it starts over and I need to get the motor running Soon. The car will not be driven on the road since there wont be any brake lights or signals hooked up, I have a painless performance wiring kit on the way but thats 2 months away.

If any more information is needed about the car or motor, Ask away

If anybody has the spare time to write up or post diagrams, That would be appreciated beyond what you would think.

This should help a little as basically all the primary wires are the same.....

http://www.clubhotrod.com/forums/sho...y+wire+diagram