Quote Originally Posted by v8notchman View Post
No not yet. I would have to modify the mating surfaces to make them flat against each other. This would not be a big deal considering the amount of work any route will take. If I flattened out the mating surfaces and bonded them into place, would I then fill in the crack where the fender meets the body with a glass type filler like Don mentioned above? If I did it right, the crack would be very close and hardly noticable. It seems that I would have to cover the crack with some kind of filler to keep the paint from cracking.
Yes, and after you bond them (and they kick), just use Rage (or your preferred Filler, but I love Rage). If you were still concerned about strength you could use some Kitty Hair or Tiger Hair, but I wouldn't-Rage (as long as your are within reasonable thickness limits) will flex with the Body and not crack-(Evercoat, (Rage's Maker) says 1/8", I think more like a 1/4")-